SP-100, SP-125 and SP-225
Don’t let their size fool you. The SP-100, SP-125 and SP-225 tailgate spreaders offer big performance for smaller application needs. The SP-100 and SP-125 are designed to spread bagged ice melters and calcium chloride pellets up to 20 feet wide, while the SP-225 can spread bagged rock salt. All three units are loaded with features that offer a level of sophistication that’s fit for snow and ice pros.
Variable Speed Control
- Adjusts spinner speed from 1-10.
- Helps manage spread width.
- Weather resistant.
- Easy cab mounting.
- Standard with model SP-100 (optional for SP-125 & SP-225).
The SP-100 comes standard with an electric gate. Just flip a switch to open and close the spreader throat to start and stop material flow to the spinner. (Model SP-125 only available with manual gate.)
The spinner motor transmission is completely electric powered. It draws electricity from the vehicle and offers plenty of power to the spreader. Also, it’s protected from the elements by a sealed drive enclosure.
Spreaders come standard with a 2-inch (51mm) receiver mount for convenient attachment to a variety of vehicles.
|Empty Weight||75 lb||65 lb||79 lb|
|Capacity (Volume)||3.0 cu ft||3.0 cu ft||3.0 cu ft|
|Capacity (Weight)||240 lb||240 lb||240 lb|
|Spreading Width||Up to 20'||Up to 20'||Up to 25'|
|Speed Control||Weather-resistant variable speed control||On/off switch||On/off switch|
|Wiring Harness||12-gauge with molded plugs and connectors||Multiple gauge harness with plug-ends and finished connectors||Automotive style with plug-ends and finished connectors|
|Frame||Powder coated steel||Powder coated steel||Powder coated steel|
|Hopper||One-piece LLDPE safety yellow poly||One-piece LLDPE safety yellow poly||One-piece LLDPE safety yellow poly|
|Motors||12-volt DC motor mounted in weather resistant enclosure||12-volt DC motor mounted in weather resistant enclosure||12-volt DC motor mounted in weather resistant enclosure|
|Spinner Drive Assembly||Maximum torque transmission with hardened-steel worm and bronze gear||Maximum torque transmission with hardened-steel worm and bronze gear||Maximum torque transmission with hardened-steel worm and bronze gear|
|Spinner||10" nylon/glass reinforced resin||10" nylon/glass reinforced resin||10" nylon/glass reinforced resin|
|Auger||N/A||N/A||3" vertical high-flow auger|
|Mounting||2" receiver hitch is standard||2" receiver hitch is standard||2" receiver hitch is standard|